SKY77148_06 Datasheet, PDF (4/14 Pages) Skyworks Solutions Inc. – SKY77148 PA Module for CDMA2000 (450-460 MHz)

DATA SHEET • SKY77148
PA MODULE FOR CDMA2000 (450–460 MHZ)
Table 5. Electrical Specifications for CDMA Recommended Operating Conditions ¹
Characteristics
Gain conditions
Digital Mode
Adjacent Channel Power ²³
885 kHz offset
1.98 MHz offset
Harmonic Suppression
Second
Third
Noise Power in RX Band 460-470 MHz
Noise Figure
Input Voltage Standing Wave Ratio
Stability (Spurious output)
Ruggedness—No damage ⁴
Symbol
GLOW
GHIGH
ACP1LOW
ACP1HIGH
ACP2LOW
ACP2HIGH
FO2
FO3
RxBN
NF
VSWR
S
Ru
Condition
VCONT ≥ 2.5 V
PO = 16 dBm
VCONT ≤ 0.5 V
PO = 29 dBm
VCONT ≥ 2.5 V
PO ≤ 16 dBm
VCONT ≤ 0.5 V
PO ≤ 28.5 dBm
VCONT ≥ 2.5 V
PO ≤ 16 dBm
VCONT ≤ 0.5 V
PO ≤ 28.5 dBm
PO ≤ 29 dBm
PO ≤ 29 dBm
PO ≤ 29 dBm
5:1 VSWR all phases
PO ≤ 29 dBm
Minimum
24.5
28.0
—
—
—
—
—
—
—
—
—
10:1
Maximum
29.0
34.0
–44.0
–44.0
–58.0
–56.0
–35.0
–40.0
–126.5
6.5
2.0:1
–60.0
1 _{Per Table 2.}
2 _{ACP is specified per CDMA2000 as the ratio of the total in-band power (1.23 MHz BW) to adjacent power in a 30 kHz BW.}
3 _{CDMA2000 is configured as DCCH = 9600, SCHO = 9600, PCH (Walsh 0) = –3.75 dB, and Peak-to-Average Ratio (CCDF = 1%) = 4.5 dB.}
4 _{All phases, time = 10 seconds.}
Unit
dB
dBc
dBc
dBm/Hz
dB
—
dBc
VSWR
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
4
May 12, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 103018B