SKY77340 Datasheet, PDF (23/27 Pages) Skyworks Solutions Inc. – PA Module for Quad-Band GSM / EDGE

PA MODULE FOR QUAD-BAND GSM / EDGE
Package Dimensions and Pin Descriptions
Figure 3 is a mechanical diagram of the pad layout for the
SKY77340, a 16-pin leadless quad-band PA module. Figure 4
provides a recommended phone board layout footprint for the
PAM to help the designer attain optimum thermal conductivity,
good grounding, and minimum RF discontinuity for the 50-ohm
terminals.
SKY77340 PRELIMINARY DATA SHEET
Figure 5 shows the device pin configuration and numbering
convention, which starts with pin 1 at the upper left, as indicated,
and increments counter-clockwise around the package. Table 6
lists the pin names and signal descriptions. Figure 6 interprets
typical Case Markings.
6
PIN 1 INDICATOR
0.1 A B C
TOP VIEW
B
C
16X SMT PAD
0.2 M A B C
8X 3.9
TOP SIDE
8
0
4X 1.013
1.15 ±0.1
8X 2.538
8X 3.513
A
0.1
SIDE VIEW
C
PIN 1
4X 3.5
A
0
4X 0.5
B
4X 1.5
4X 2.5
2X 3.5
20X SOLDER MASK OPENING
0.2 A B C
BOTTOM VIEW
0.5 ±0.1
0.5 ±0.05
(0.1)
METAL PAD EDGE
4X (1.875)
DETAIL A
PAD
SCALE: 2X
8X THIS ROTATION
8X ROTATED 180˚
8X (0.875)
8X (0.775)
(0.1)
4X (0.875)
DETAIL B
SCALE: 2X
NOTES: Unless otherwise specified.
1. Dimensioning and Tolerancing in accordance with ASME Y14.5M–1994.
2. Pads are solder mask defined on 3 edges.
Figure 3. SKY77340 16-Pin MCM Package Dimensional Drawing
PIN 1 INDICATOR
( 0.2X 45˚ )
DETAIL C
SCALE: 2X
200147_003
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200147A • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • October 17, 2006
23