SKY66115-11_17 Datasheet, PDF (2/12 Pages) Skyworks Solutions Inc. – 400 to 510 MHz Front-End Module for Range Extension Applications

DATA SHEET • SKY66115-11: 400 TO 510 MHz FEM
Table 1. SKY66115-11 Signal Descriptions
Pin
Name
Description
1
GND
Ground
2
RX
Receive port
3
GND
Ground
4
TX
Transmit port
5
GND
Ground
6
VCC
Positive power supply
7
GND
Ground
8
GND
Ground
Pin
Name
9
GND
10 GND
11 GND
12 ANT
13 GND
14 VDD
15 CSD
16 CTX
Description
Ground
Ground
Ground
Antenna port
Ground
Positive power supply
Shutdown control signal
TX/RX control signal
Technical Description
The SKY66115-11 consists of a complete T/R chain with a T/R
switch contained in the module. The module has a shutdown
mode to minimize power consumption.
Transmit Path
The transmit path contains an amplifier optimized for saturated
performance. The output is internally matched for optimum
output power and efficiency into a 50 Ω load impedance. The
output is passed through a harmonic filter before being fed
through the switch. The input provides a good return loss into a
50  source impedance.
Operation Mode Control
The operating modes are controlled by the two digital pins (CSD
and CTX, pins 15 and 16, respectively). The control logic truth
table is provided in Table 8.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY66115-11 are provided
in Table 2. Recommended operating conditions are specified in
Table 3 and electrical specifications are provided in Tables 4
through 7. Table 8 shows the mode logic truth table.
Typical performance characteristics are shown in Figures 3
through 8.
Table 2. SKY66115-11 Absolute Maximum Ratings¹
Parameter
Symbol
Test Condition
Minimum
Maximum
Units
Supply voltage
VCC
2.5
3.8
V
Control voltages
VDD, VCSD, VCTX
–0.2
VCC
V
RF input power, receive mode
PIN_RX
Rx mode at ANT
+30
dBm
RF input power, transmit mode
PIN_TX
Tx mode at TX
10
dBm
Voltage standing wave ratio
VSWR
10:1
Operating temperature
TA
–40
+85
C
Storage temperature
TSTG
–65
+150
C
Transmit duty cycle
50
%
1 _{Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters}
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
January 11, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203309G