SKY13498-21 Datasheet, PDF (18/21 Pages) Skyworks Solutions Inc. – 0.7 to 2.7 GHz SP10T MIPI Antenna Switch Module

DATA SHEET • SKY13498-21: SP10T ANTENNA SWITCH WITH MIPI INTERFACE
Pin 1 Indicator
0.30 x 45°
Pin 1
2.8
Pin 20
12X 0.5
12X 0.5
16X 0.2
0.4 Pitch
2X 0.45
2.8
Stencil Aperture
Top View
Package
Outline
Stencil aperture size for center
ground pad should be 80% to 100%
(by area) of the solder mask opening.
Pin 20
Pin 1
Thermal Via Array, ∅0.3 mm
on 0.6 mm pitch will improve
thermal performance.
NOTE: thermal vias should be
resin filled and capped according to
IPC-4761, Type VII vias.
2.8
30-35 μm Cu thickness is recommended.
11X 0.5
Pin 1 Indicator
0.30 x 45°
9X 0.5
Pin 1
14X 0.2
0.6 Pitch
Package
Outline
2.8
0.4 Pitch
2.9
0.25 Typ
Pin 20
Opening size of
60 to 100% of exposed
center opening shown
12X 0.6
12X 0.6
16X 0.3
0.4 Pitch
0.6 Pitch
Metallization
Top View
All dimensions are in millimeters
2X 0.45
2.9
Package
Outline
Solder Mask Opening
Top View
Figure 10. SKY13498-21 PCB Layout Footprint
(Top View)
S3313
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
18
April 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202807E