SP703 Datasheet, PDF (2/16 Pages) Sipex Corporation – Low Power Microprocessor Supervisory with Battery Switch-Over

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation
of the device at these ratings or any other above those
indicated in the operation sections of the specifica-
tions below is not implied. Exposure to absolute maxi-
mum rating conditions for extended periods of time
may affect reliability and cause permanent damage to
the device.
V_CC........................................................-0.3V to 6.0V
V_BATT.....................................................-0.3V to 6.0V
All Other Inputs......................................-0.3V to (V_CC +0.3V)
Input Current:
V_CC.........................................................250mA
V_BATT........................................................50mA
GND........................................................20mA
Output Current:
V_OUT.....Short-Circuit Protected for up to 10sec
All Other Inputs.................................20mA
Rate of Rise, V_CC,V_BATT..................100V/µs
Continuous Power Dissipation.......500mW
Storage Temperature.......-65°C to +160°C
Lead Temperature(soldering,10sec).................+300°C
ESD Rating.............................4kV Human Body Model
SPECIFICATIONS
V_cc=4.75v to 5.50V for SP703, V_CC = 4.50V to 5.50V for SP704, V_BATT=2.80V, T_A=T_MIN to T_MAX, typical specified at 25^OC, unless otherwise noted.
PARAMETERS
MIN.
TYP.
MAX. UNITS CONDITIONS
Operating Voltage Range,
0
5.5 Volts
V_CC or V_BATT, NOTE 1
Supply Current, I_SUPPLY,
I_SUPPLY in Battery Backup Mode,
V_CC = 0V, V_BATT = 2.8V
V_BATT Standby Current, NOTE 2
-0.1
35
0.001
60
0.6
0.02
µA excluding I_OUT
µA
µA
V_CC > V_BATT + 0.2V
V_OUT Output
V_OUT in Battery-Backup Mode
V_CC < V_BATT - 0.2V
V_CC - 0.1
V_BATT -0.15
V_CC - 0.03
V_CC - 0.15
V_BATT - 0.04
V_BATT - 0.20
Volts
Volts
I_OUT = 50mA
I_OUT = 250mA
I_OUT = 5mA
I_OUT = 25mA
Battery Switch Threshold,
V_CC to V_BATT
Battery Switchover Hysteresis
20
Power-up
mV
-20
Power-down
40
mV Peak to Peak
Reset Threshold
4.50
4.65
4.75
SP703
4.25
4.40
4.50 ^{Volts SP704}
SP703/704DS/07
SP703/704 Low Power Microprocessor Supervisory
2
© Copyright 2000 Sipex Corporation