SP505 Datasheet, PDF (2/35 Pages) Sipex Corporation – WAN Multi-Mode Serial Transceiver

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation
of the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may
affect reliability.
V_CC............................................................................+7V
Input Voltages:
Logic...............................-0.3V to (V_CC+0.5V)
Drivers............................-0.3V to (V_CC+0.5V)
Receivers........................................±15.5V
Output Voltages:
Logic................................-0.3V to (V_CC+0.5V)
Drivers................................................±15V
Receivers........................-0.3V to (V_CC+0.5V)
Storage Temperature..........................-65˚C to +150˚C
Power Dissipation.........................................2000mW
Package Derating:
ø_JA....................................................46 °C/W
ø_JC...................................................16 °C/W
STORAGE CONSIDERATIONS
Due to the relatively large package size of the 80-pin
quad flat-pack, storage in a low humidity environment
is preferred. Large high density plastic packages are
moisture sensitive and should be stored in Dry Vapor
Barrier Bags. Prior to usage, the parts should remain
bagged and stored below 40°C and 60%RH. If the
parts are removed from the bag, they should be used
within 48 hours or stored in an environment at or below
20%RH. If the above conditions cannot be followed,
the parts should be baked for four hours at 125°C in
order remove moisture prior to soldering. Sipex ships
the 80-pin QFP in Dry Vapor Barrier Bags with a
humidity indicator card and desiccant pack. The
humidity indicator should be below 30%RH.
SPECIFICATIONS
T_A = +25°C and V_CC = +4.75V to +5.25V unless otherwise noted.
MIN. TYP.
LOGIC INPUTS
V_IL
V_IH
2.0
LOGIC OUTPUTS
V_OL
V_OH
2.4
V.28 DRIVER
DC Parameters
Outputs
Open Circuit Voltage
Loaded Voltage
+5.0
Short-Circuit Current
Power-Off Impedance
300
AC Parameters
Outputs
Transition Time
Instantaneous Slew Rate
Propagation Delay
t_PHL
0.5
1
t_PLH
0.5
1
Max.Transmission Rate 120
230
MAX.
0.8
0.4
+15
+15
+100
1.5
30
5
5
UNITS
CONDITIONS
Volts
Volts
Volts
Volts
I_OUT= –3.2mA
I_OUT= 1.0mA
Volts
Volts
mA
Ω
µs
V/µs
µs
µs
kbps
per Figure 1
per Figure 2
per Figure 4
per Figure 5
V_CC = +5V for AC parameters
per Figure 6; +3V to -3V
per Figure 3
V.28 RECEIVER
DC Parameters
Inputs
Input Impedance
Open-Circuit Bias
HIGH Threshold
LOW Threshold
AC Parameters
Propagation Delay
t_PHL
t_PLH
3
7
kΩ
per Figure 7
+2.0 Volts per Figure 8
1.7
3.0
Volts
0.8
1.2
Volts
V_CC = +5V for AC parameters
50
100
500
ns
50
100
500
ns
Rev: A Date: 1/27/04
SP505 Multi–Mode Serial Transceiver
2
© Copyright 2004 Sipex Corporation