EFM32G800 Datasheet, PDF (9/22 Pages) Silicon Laboratories – Memory Protection Unit

Alternate
Functionality
ADC0_CH3
ADC0_CH4
ADC0_CH5
ADC0_CH6
ADC0_CH7
BOOT_RX
BOOT_TX
CMU_CLK0
CMU_CLK1
DAC0_OUT0
DAC0_OUT1
DBG_SWCLK
0
PD3
PD4
PD5
PD6
PD7
PE11
PE10
PA2
PA1
PB11
PB12
LOCATION
1
2
PC12
PD8
PF0
PF0
DBG_SWDIO
PF1
PF1
DBG_SWO
EBI_AD00
EBI_AD01
EBI_AD02
EBI_AD03
EBI_AD04
EBI_AD05
EBI_AD06
EBI_AD07
EBI_AD08
EBI_AD09
EBI_AD10
EBI_AD11
EBI_AD12
EBI_AD13
EBI_AD14
EBI_AD15
EBI_ALE
EBI_ARDY
EBI_CS0
EBI_CS1
EBI_CS2
EBI_CS3
EBI_REn
EBI_WEn
PF2
PC15
PE8
PE9
PE10
PE11
PE12
PE13
PE14
PE15
PA15
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PF3
PF2
PD9
PD10
PD11
PD12
PF5
PF4
...the world's most energy friendly microcontrollers
3
Description
Analog to digital converter ADC0, input channel number 3.
Analog to digital converter ADC0, input channel number 4.
Analog to digital converter ADC0, input channel number 5.
Analog to digital converter ADC0, input channel number 6.
Analog to digital converter ADC0, input channel number 7.
Bootloader RX.
Bootloader TX.
Clock Management Unit, clock output number 0.
Clock Management Unit, clock output number 1.
Digital to Analog Converter DAC0 output channel number 0.
Digital to Analog Converter DAC0 output channel number 1.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and has a built-in pull
down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and has a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must be enabled by
software to be used.
External Bus Interface (EBI) address and data input / output pin 00.
External Bus Interface (EBI) address and data input / output pin 01.
External Bus Interface (EBI) address and data input / output pin 02.
External Bus Interface (EBI) address and data input / output pin 03.
External Bus Interface (EBI) address and data input / output pin 04.
External Bus Interface (EBI) address and data input / output pin 05.
External Bus Interface (EBI) address and data input / output pin 06.
External Bus Interface (EBI) address and data input / output pin 07.
External Bus Interface (EBI) address and data input / output pin 08.
External Bus Interface (EBI) address and data input / output pin 09.
External Bus Interface (EBI) address and data input / output pin 10.
External Bus Interface (EBI) address and data input / output pin 11.
External Bus Interface (EBI) address and data input / output pin 12.
External Bus Interface (EBI) address and data input / output pin 13.
External Bus Interface (EBI) address and data input / output pin 14.
External Bus Interface (EBI) address and data input / output pin 15.
External Bus Interface (EBI) Address Latch Enable output.
External Bus Interface (EBI) Hardware Ready Control input.
External Bus Interface (EBI) Chip Select output 0.
External Bus Interface (EBI) Chip Select output 1.
External Bus Interface (EBI) Chip Select output 2.
External Bus Interface (EBI) Chip Select output 3.
External Bus Interface (EBI) Read Enable output.
External Bus Interface (EBI) Write Enable output.
2015-05-22 - EFM32G800FXX - d0322_Rev1.90
9
www.silabs.com