AN957 Datasheet, PDF (9/25 Pages) List of Unclassifed Manufacturers – Measuring HEXFETCharacteristics

2.6.3 Step 3 — First Configuration
A new project will show two problems in the [Problems] list.
AN957: TouchXpress™ Configuration and Profiling Guide
Simplicity Studio Tools
Figure 2.7. Problems Shown in a New Xpress Configurator Project
These problems will disappear when at least one sensor has been enabled and at least one enabled sensor has been designated as a
wake-up source.
For this example, enable all the sensors using the [Fill Down] button. The [Fill Down] button copies configurable parameters from
CS00 and fills that information into all sensors that follow.
Check the [En] box for the CS00 channel. After clicking [Fill Down], the sensor configuration should look as follows.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 8