AN957 Datasheet, PDF (19/25 Pages) List of Unclassifed Manufacturers – Measuring HEXFETCharacteristics

AN957: TouchXpress™ Configuration and Profiling Guide
Example Development Workflow
4. Example Development Workflow
Because of the iterative nature of development, the tools in Simplicity Studio have been designed to work together to enable users to
easily switch between [Xpress Configurator] and [Capacitive Sense Profiler] with minimal effort. The example below shows how the
these tools work together with hardware, first using the TouchXpress evaluation board and on-board sensors, then the evaluation board
and flying wires to a copper tape mock-up, and finally to a prototype final design with on-board hardware and sensors.
4.1 Step 1 — Starting in Xpress Configurator
Use the [Demo] tile in Simplicity Studio to load a TouchXpress evaluation board with a standard configuration profile. After this step, a
user can create a new [Xpress Configurator] project and import the image. This gives a good start on the feature settings. Other fea-
tures such as the buzzer and touch time-outs can be configured here to find a feature set that seems promising for the product being
developed.
Figure 4.1. Downloading a Configuration Profile Template
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 18