AN957 Datasheet, PDF (2/25 Pages) List of Unclassifed Manufacturers – Measuring HEXFETCharacteristics

AN957: TouchXpress™ Configuration and Profiling Guide
Workflow Overview
1. Workflow Overview
Many capacitive sensing-enabled products follow a similar development flow:
• Evaluation — This stage usually involves using vendor-provided evaluation boards.
• Fly-wire prototyping — In this stage, the developer may route wires from a vendor evaluation kit to copper tape in a product mock-up
case to simulate the touch interface.
• In-system prototyping — This stage involves low volume PCB manufacturing with capacitive sense devices on-board, routed to
PCB-implemented touch sensors.
• Deployment — In this stage, the final configuration of the capacitive sensing device is installed in the final revision of the product
hardware.
The tools provided by Simplicity Studio enable this entire development flow for the TouchXpress devices.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 1