EFR32FG12 Datasheet, PDF (87/183 Pages) –

EFR32FG12 Flex Gecko Proprietary Protocol SoC Family Data Sheet
Electrical Specifications
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
External load capactiance,
OUTSCALE=0
C_LOAD
—
—
75
pF
Note:
1. Supply current specifications are for VDAC circuitry operating with static output only and do not include current required to drive
the load.
2. In differential mode, the output is defined as the difference between two single-ended outputs. Absolute voltage on each output is
limited to the single-ended range.
3. Entire range is monotonic and has no missing codes.
4. Current from HFPERCLK is dependent on HFPERCLK frequency. This current contributes to the total supply current used when
the clock to the DAC module is enabled in the CMU.
5. Gain is calculated by measuring the slope from 10% to 90% of full scale. Offset is calculated by comparing actual VDAC output at
10% of full scale to ideal VDAC output at 10% of full scale with the measured gain.
6. PSRR calculated as 20 * log₁₀(ΔVDD / ΔV_OUT), VDAC output at 90% of full scale
silabs.com | Building a more connected world.
Rev. 1.0 | 82