UG130 Datasheet, PDF (6/14 Pages) Silicon Laboratories – Si86xxT-EVB Users Guide

UG130: Si86xxT-EVB User's Guide
Hardware Setup and Demonstration
3.2.3 Configured
For an example, see the figure below.
• Place a shunt across J1 at A2.
• This produces a logic Low input on forward channel A2. The SI88642ET will transmit this to the B-side, and the corresponding
logic Low can be observed and measured with the DMM on J2, B2.
• Place a shunt across J2 at B3.
• This produces a logic Low input on reverse channel B3. The SI88642ET will transmit this to the A-side, and the corresponding
logic Low can be measured with the DMM on J1, A3.
Figure 3.3. EVB Configured for DC Signal Demonstration without Enable
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 5