|
UG130 Datasheet, PDF (3/14 Pages) Silicon Laboratories – Si86xxT-EVB Users Guide | |||
|
◁ |
2. Required Equipment
The following equipment is required to demonstrate the evaluation board:
⢠Two DC Power supplies 2.5â5.5 V, 100 mA.
⢠(Optionally) Isolated from one another.
⢠Four banana-to-test-clip cables with clips to supply power to the board.
⢠Two 2-pin header shunts (included).
⢠One DMM.
⢠One DMM Voltage Probe Set.
UG130: Si86xxT-EVB User's Guide
Required Equipment
2.1 Optional Equipment
The following equipment is optional and can be used to demonstrate more of the evaluation board functionalities, including signal prop-
agation statistics:
⢠One Signal generator.
⢠Two BNC Coaxial cables.
⢠One BNC splitter.
⢠One BNC to test-clip connector.
⢠One 2-Channel Oscilloscope.
⢠One 10x Voltage Probe.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 2
|
▷ |