English
Language : 

SI7013 Datasheet, PDF (6/43 Pages) Silicon Laboratories – I2C HUMIDITY AND TWO-ZONE TEMPERATURE SENSOR
Si7013
Table 3. I2C Interface Specifications1
1.9  VDD  3.6 V; TA = –40 to +85 °C (G grade) or –40 to +125 °C (I/Y grade) unless otherwise noted.
Parameter
Symbol
Test Condition
Min
Typ Max Unit
SDA Valid Time
tVD;DAT From SCL low to data valid
—
SDA Acknowledge Valid Time tVD;ACK From SCL low to data valid
—
Suppressed Pulse Width3
tSPS
50
—
0.9
µs
—
0.9
µs
—
—
ns
Notes:
1. All values are referenced to VIL and/or VIH.
2. Depending on the conversion command, the Si7013 may hold the master during the conversion (clock stretch). At
above 300 kHz SCL, the Si7013 may hold the master briefly for user register and device ID transactions. At the highest
I2C speed of 400 kHz the stretching will be <10 µs.
3. Pulses up to and including 50ns will be suppressed.
SCL
tBUF
tSTH
1/fSCL
tSKH
tSP
tDS
tDH
tSKL
tSPS
SDA
Start Bit
D7
D6
D5
D0
R/W
ACK
Stop Bit
tSTS
tVD : ACK
Figure 1. I2C Interface Timing Diagram
6
Rev. 0.95