SI590 Datasheet, PDF (6/12 Pages) Silicon Laboratories – 1 ps MAX JITTER CRYSTAL OSCILLATOR

Si590/591
3. Ordering Information
The Si590/591 XO supports a variety of options including frequency, temperature stability, output format, and V_DD.
Specific device configurations are programmed into the Si590/591 at time of shipment. Configurations can be
specified using the Part Number Configuration chart below. Silicon Laboratories provides a web browser-based
part number configuration utility to simplify this process. Refer to www.silabs.com/VCXOPartNumber to access this
tool and for further ordering instructions. The Si590 and Si591 XO series are supplied in an industry-standard,
RoHS compliant, 6-pad, 5 x 7 mm package. The Si591 Series supports an alternate OE pinout (pin #1) for
LVPECL, LVDS, and CML output formats. See Tables 8 and 9 for the pinout differences between the Si590 and
Si591 series.
59x
X
X
XXXMXXX
D
G
R
590 or 591 XO
Product Family
Tape & Reel Packaging
Blank = Trays
Operating Temp Range (°C)
G
–40 to +85°C
1^st Option Code
V_DD Output Format Output Enable Polarity
A 3.3 LVPECL
High
B 3.3 LVDS
High
C 3.3 CMOS
High
D 3.3 CML
High
E 2.5 LVPECL
High
F 2.5 LVDS
High
G 2.5 CMOS
High
H 2.5 CML
High
J 1.8 CMOS
High
K 1.8 CML
High
M 3.3 LVPECL
Low
N 3.3 LVDS
Low
P 3.3 CMOS
Low
Q 3.3 CML
Low
R 2.5 LVPECL
Low
S 2.5 LVDS
Low
T 2.5 CMOS
Low
U 2.5 CML
Low
V 1.8 CMOS
Low
W 1.8 CML
Low
Note:
CMOS available to 160 MHz.
Part Revision Letter
Frequency (e.g., 148M352 is 148.352 MHz)
Available frequency range is 10 to 525 MHz. The position of “M” shifts
to denote higher or lower frequencies. If the frequency of interest
requires greater than 6 digit resolution, a six digit code will be
assigned for the specific frequency.
Code
A
B
C
2^nd Option Code
Total Stablility (ppm, max, ±)
100
50
30
Temperature Stablility (ppm, max, ±)
50
25
20
Example P/N: 590BB148M352DGR is a 5 x 7 XO in a 6 pad package. The frequency is 148.352 MHz, with a 3.3 V supply, LVDS output, and
Output Enable active high polarity. Overall stability is specifed as ±50 ppm. The device is specified for –40 to +85 °C ambient temperature
range operation and is shipped in tape and reel format.
Figure 1. Part Number Convention
6
Preliminary Rev. 0.25