SI590 Datasheet, PDF (4/12 Pages) Silicon Laboratories – 1 ps MAX JITTER CRYSTAL OSCILLATOR

Si590/591
Table 6. Absolute Maximum Ratings¹
Parameter
Symbol
Rating
Units
Maximum Operating Temperature
T_AMAX
85
ºC
Supply Voltage, 1.8 V Option
V_DD
–0.5 to +1.9
V
Supply Voltage, 2.5/3.3 V Option
V_DD
–0.5 to +3.8
V
Input Voltage (any input pin)
V_I
–0.5 to V_DD + 0.3
Volts
Storage Temperature
T_S
–55 to +125
ºC
ESD Sensitivity (HBM, per JESD22-A114)
ESD
2500
V
Soldering Temperature (Pb-free profile)²
Soldering Temperature Time @ T_PEAK (Pb-free profile)²
T_PEAK
t_P
260
20–40
ºC
seconds
Notes:
1. Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional
operation or specification compliance is not implied at these conditions. Exposure to maximum rating conditions for
extended periods may affect device reliability.
2. The device is compliant with JEDEC J-STD-020C. Refer to Si5xx Packaging FAQ available for download at
www.silabs.com/VCXO for further information, including soldering profiles.
Table 7. Environmental Compliance
The Si590/591 meets the following qualification test requirements.
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Gross & Fine Leak
Resistance to Solvents
Conditions/Test Method
MIL-STD-883G, Method 2002.3 B
MIL-STD-883G, Method 2007.3 A
MIL-STD-883G, Method 203.8
MIL-STD-883G, Method 1014.7
MIL-STD-883G, Method 2015
4
Preliminary Rev. 0.25