EFR32MG1 Datasheet, PDF (46/94 Pages) Silicon Laboratories – Home and Building Automation and Security

EFR32MG1 Mighty Gecko SoC with Integrated Serial Flash Data Sheet
Electrical Specifications
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Settling time, (output settled t_{IDAC_SETTLE}
within 1% of steady state val-
ue)
Range setting is changed
Step value is changed
—
5
—
μs
—
1
—
μs
Current consumption in EM0 I_IDAC
or EM1 ²
Source mode, excluding output
—
8.9
13
μA
current
Sink mode, excluding output cur-
—
12
16
μA
rent
Current consumption in EM2
or EM3²
Source mode, excluding output
—
1.04
—
μA
current, duty cycle mode, T = 25
°C
Sink mode, excluding output cur-
—
1.08
—
μA
rent, duty cycle mode, T = 25 °C
Source mode, excluding output
—
8.9
—
μA
current, duty cycle mode, T ≥ 85
°C
Sink mode, excluding output cur-
—
12
—
μA
rent, duty cycle mode, T ≥ 85 °C
Output voltage compliance in I_{COMP_SRC}
RANGESEL1=0, output voltage =
—
0.04
—
%
source mode, source current
min(V_IOVDD, V_AVDD2-100 mv)
change relative to current
sourced at 0 V
RANGESEL1=1, output voltage =
—
0.02
—
%
min(V_IOVDD, V_AVDD2-100 mV)
RANGESEL1=2, output voltage =
—
0.02
—
%
min(V_IOVDD, V_AVDD2-150 mV)
RANGESEL1=3, output voltage =
—
0.02
—
%
min(V_IOVDD, V_AVDD2-250 mV)
Output voltage compliance in I_{COMP_SINK}
RANGESEL1=0, output voltage =
—
0.18
—
%
sink mode, sink current
100 mV
change relative to current
sunk at IOVDD
RANGESEL1=1, output voltage =
—
0.12
—
%
100 mV
RANGESEL1=2, output voltage =
—
0.08
—
%
150 mV
RANGESEL1=3, output voltage =
—
0.02
—
%
250 mV
Note:
1. In IDAC_CURPROG register
2. The IDAC is supplied by either AVDD, DVDD, or IOVDD based on the setting of ANASW in the EMU_PWRCTRL register and
PWRSEL in the IDAC_CTRL register. Setting PWRSEL to 1 selects IOVDD. With PWRSEL cleared to 0, ANASW selects be-
tween AVDD (0) and DVDD (1).
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.0 | 45