|
SI7020-A10 Datasheet, PDF (33/34 Pages) Silicon Laboratories – Excellent long term stability | |||
|
◁ |
Si7020-A10
DOCUMENT CHANGE LIST
Revision 0.1 to Revision 0.9
ï® Updates to Section 1. Electrical Specifications.
ï® Updated Table 2. General Specifications.
ï® Update Figure 1. I2C Interface Timing Diagram.
ï® Updated Section 2. Typical Applications Circuits.
ï® Updated Table 6. Thermal Characteristics.
ï® Updated Table 12. I2C Command Table.
ï® Updated Section 4.4 PCB Assembly.
ï® Updated Section 5.3. Measuring Relative Humidity.
ï® Updated Section 5.4. Measuring Temperature.
ï® Updated Section 5.5. Electronic Serial Number.
ï® Updated Section 9.1. Package Outline.
ï® Updated Section 11. Top Marking.
Revision 0.9 to Revision 0.95
ï® Updated the Features on page 1Updated block
diagram
ï® Added -I part numbers
ï® Updated Table 1
ï® Updated Table 2
ï® Updated Table 3
ï® Updated Table 4
ï® Updated Table 5
ï® Updated Figure 4
ï® Updated Section 4.4.1.
ï® Updated Table 12
ï® Updated Section 5
ï® Corrected a typo on Section 6.1, Register 1.
ï® Updated firmware version to -A10 in Section 8
Revision 0.95 to Revision 1.0
ï® Updated Table 2.
ï® Clarified footnotes in Table 4.
ï® Update Table 7.
ï® Updated part numbers in Table 8.
ï® Updated Section 5.1.
ï® Updated Section 5.1.2.
ï® Updated Section 5.4.
ï® Updated footnotes in Table 12.
ï® Updated description for Register 1, bit D6.
ï® Updated automotive part numbers in Table 13.
ï® Added firmware description to Table 13.
Revision 1.0 to Revision 1.1
ï® Updated Note 2 in Table 3.
ï® Updated Section 4.5.
ï® Updated Table 9.
ï® Corrected a typo in the I2C sequence for no-hold
mode in Section 5.1.
ï® Updated Table 15, dimensions F1 and F2.
Rev. 1.1
33
|
▷ |