English
Language : 

EFM32G280 Datasheet, PDF (32/72 Pages) Silicon Laboratories – Wake-up Interrupt Controller
3.9.5 AUXHFRCO
Table 3.12. AUXHFRCO
...the world's most energy friendly microcontrollers
Symbol
Parameter
Condition
Min
Typ
Max
Unit
fAUXHFRCO
Oscillation frequen-
cy, VDD= 3.0 V,
TAMB=25°C
14 MHz frequency band
tAUXHFRCO_settlingSettling time after
start-up
fAUXHFRCO = 14 MHz
13.580
14.0
14.420 MHz
0.6
Cycles
DCAUXHFRCO Duty cycle
fAUXHFRCO = 14 MHz
48.5
50
51 %
TUNESTEPAUX-Frequency step
HFRCO
for LSB change in
TUNING value
0.31
%
1The TUNING field in the CMU_AUXHFRCOCTRL register may be used to adjust the AUXHFRCO frequency. By using a stable
frequency reference such as the LFXO or HFXO, a firmware calibration routine can vary the TUNING bits and the frequency band
to maintain the AUXHFRCO frequency at any arbitrary value in the 14 MHz range across operating conditions.
3.9.6 ULFRCO
Table 3.13. ULFRCO
Symbol
fULFRCO
TCULFRCO
VCULFRCO
Parameter
Condition
Oscillation frequen- 25°C, 3V
cy
Temperature coeffi-
cient
Supply voltage co-
efficient
Min
Typ
0.70
Max
Unit
1.75 kHz
0.05
%/°C
-18.2
%/V
3.10 Analog Digital Converter (ADC)
Table 3.14. ADC
Symbol
Parameter
Condition
VADCIN
Single ended
Input voltage range
Differential
VADCREFIN
Input range of exter-
nal reference volt-
age, single ended
and differential
VADCREFIN_CH7 Input range of ex-
ternal negative ref-
erence voltage on
channel 7
See VADCREFIN
VADCREFIN_CH6 Input range of ex-
ternal positive ref-
erence voltage on
channel 6
See VADCREFIN
VADCCMIN
Common mode in-
put range
IADCIN
Input current
2pF sampling capacitors
Min
Typ
0
-VREF/2
1.25
Max
Unit
VREF V
VREF/2 V
VDD V
0
VDD - 1.1 V
0.625
VDD V
0
VDD V
<100
nA
2015-05-22 - EFM32G280FXX - d0006_Rev1.90
32
www.silabs.com