SLWSTK6061A Datasheet, PDF (2/32 Pages) Silicon Laboratories – UG182: EFR32 Flex Gecko 2400/868 MHz Wireless Starter Kit

UG182: EFR32 Flex Gecko 2400/868 MHz Wireless Starter Kit
Introduction
1. Introduction
The SLWSTK6061A Wireless Starter Kit provides a complete development platform for Silicon Labs EFR32 Flex Gecko Wireless Sys-
tem-on-Chips.
The core of the SLWSTK6061A is the Wireless Starter Kit Mainboard which features an on-board J-Link debugger, an Advanced Ener-
gy Monitor (AEM) for real-time current and voltage monitoring, a Virtual COM port interface (VCOM), and access to the Packet Trace
Interface (PTI).
The WSTK Mainboard is paired with an EFR32FG 2400/868 MHz 13 dBm radio board that plugs directly into the mainboard. The radio
board features the EFR32 itself and the RF interface. Please refer to the Reference Manual for the included radio boards for detailed
specifications and RF performance figures.
All debug functionality, including AEM, VCOM and PTI, can also be used towards an external target instead of the included radio board.
To further enhance the WSTK usability, the WSTK Mainboard contains sensors and peripherals demonstrating some of the Wireless
SoC's many capabilities.
1.1 Kit Contents
The following items are included in the box:
• 2x BRD4001A Wireless Starter Kit Mainboards
• 2x BRD4250B EFR32FG 2400/868 MHz 13 dBm Radio Boards
• 2x 868 MHz antennas with SMA connector
• 2x CR2032 Lithium batteries
• 2x AA battery holders
• 2x USB Type A <-> USB Mini-B cables
• 1x BRD8010A WSTK Debug Adapter
1.2 Getting Started
Detailed instructions for how to get started can be found on the Silicon Labs web pages:
http://www.silabs.com/start-efr32fg
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.00 | 1