|
SLWSTK6061A Datasheet, PDF (1/32 Pages) Silicon Laboratories – UG182: EFR32 Flex Gecko 2400/868 MHz Wireless Starter Kit | |||
|
UG182: EFR32 Flex Gecko 2400/868 MHz
Wireless Starter Kit
The SLWSTK6061A Wireless Starter Kit is an excellent starting
point to get familiar with the EFR32⢠Flex Gecko Wireless Sys-
tem-on-Chip.
The Wireless Starter Kit Mainboard contains sensors and peripherals demonstrating
some of the Flex Gecko's many capabilities. The kit provides all necessary tools for de-
veloping a Silicon Labs wireless application.
KIT FEATURES
⢠Ethernet and USB connectivity
⢠Advanced Energy Monitor
⢠Packet Trace Interface support
⢠SEGGER J-Link on-board debugger
⢠Debug Multiplexer supporting external
hardware as well as radio board
⢠Silicon Labs' Si7021 Relative Humidity and
Temperature sensor
⢠Ultra low power 128x128 pixel Memory
LCD
⢠User LEDs / Pushbuttons
⢠20-pin 2.54 mm header for expansion
boards
⢠Breakout pads for direct access to all radio
I/O pins
⢠Power sources includes USB, CR2032
coin cell and AA batteries.
RADIO BOARD FEATURES
⢠EFR32 Flex Gecko Wireless SoC with 256
kB Flash and 32 kB RAM.
(EFR32FG1P133F256GM48)
⢠Inverted-F PCB antenna (2.4 GHz band)
⢠SMA connector (868 MHz band)
SOFTWARE SUPPORT
⢠Simplicity Studioâ¢
⢠Energy Profiler
⢠Network Analyzer
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.00
|
▷ |