SLWSTK6061A Datasheet, PDF (19/32 Pages) Silicon Laboratories – UG182: EFR32 Flex Gecko 2400/868 MHz Wireless Starter Kit

UG182: EFR32 Flex Gecko 2400/868 MHz Wireless Starter Kit
Board Controller
■ Built-in Help
The admin console has a built in help system which is accessed by the help command. The help command will print a list of all top
level commands:
WSTK> help
*************** Root commands ****************
aem
AEM commands [ calibrate, current, dump, ... ]
boardid
Commands for board ID probe. [ list, probe ]
dbg
Debug interface status and control [ info, mode,]
dch
Datachannel control and info commands [ info ]
discovery
Discovery service commands.
net
Network commands. [ dnslookup, geoprobe, ip ]
pti
Packet trace interface status and control [ config, disable, dump, ... ]
quit
Exit from shell
sys
System commands [ nickname, reset, scratch, ... ]
target
Target commands. [ button, flashwrite, go, ... ]
time
Time Service commands [ client, server ]
user
User management functions [ login,]
The help command can be used in conjunction with any top level command to get a list of sub-commands with description. For exam-
ple, pti help will print a list of all available sub-commands of pti:
WSTK> pti help
*************** pti commands ****************
config
Configure packet trace
disable
Disable packet trace
dump
Dump PTI packets to the console as they come
enable
Enable packet trace
info
Packet trace state information
This means that running pti enable will enable packet trace.
■ Command Examples
PTI Configuration
pti config 0 efruart 1600000
Configures PTI to use the "EFRUART" mode at 1.6 Mb/s.
Serial Port Configuration
serial config vcom handshake enable
Enables hardware handshake on the VCOM UART connection.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.00 | 18