ISL29033 Datasheet, PDF (2/15 Pages) Intersil Corporation – Simple output code directly proportional to lux

ISL29033
Pin Configuration
ISL29033
(6 LD ODFN)
TOP VIEW
VDD ₁
6 SDA
GND 2
PD*
5 SCL
REXT 3
4 INT
*EXPOSED PAD CAN BE CONNECTED TO GND OR
ELECTRICALLY ISOLATED
Pin Descriptions
PIN
NUMBER PIN NAME
DESCRIPTION
PD
PD Thermal Pad (connect to GND, or float)
1
VDD Positive supply: 2.25V to 3.63V
2
GND Ground
3
REXT External resistor pin for ADC reference; connect
this pin to ground through a (nominal) 499kΩ
resistor.
4
INT Interrupt pin: low for interrupt alarming. INT pin
is open-drain. INT remains asserted until the
interrupt flag status bit is reset.
5
SCL I²C serial clock
6
SDA I²C serial data
Ordering Information
PART NUMBER
(Notes 1, 2, 3, 4)
TEMP. RANGE
(°C)
TAPE AND REEL
(UNITS)
PACKAGE
(RoHS COMPLIANT)
PKG.
DWG. #
ISL29033IROZ-T7
-40 to +85
3k
6 Ld ODFN
L6.2x2.1
ISL29033IROZ-EVALZ
Evaluation Board
NOTES:
1. Refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), see device information page for ISL29033. For more information on MSL, see Tech Brief TB477.
4. The part marking is located on the bottom of the part.
Submit Document Feedback
2
FN7656.5
September 28, 2016