ISL29033 Datasheet, PDF (14/15 Pages) Intersil Corporation – Simple output code directly proportional to lux

ISL29033
Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted.
Visit our website to make sure you have the latest revision.
DATE
REVISION
CHANGE
September 28, 2016 FN7656.5 Updated Related Literature section.
Updated Pin Configuration title changed “Bottom View” to “Top View”.
April 21, 2016
FN7656.4 Removed AN1422 reference on page 1.
December 16, 2015
FN7656.3
Ambient Light on page 6: Removed mention of “once mode” in Principles of Operation/Ambient Light.
Command Register I 00 (Hex) on page 8: Split section 1 under Register Set/Command Register I into 2 sections.
Updated POD L6.2x2.1 to most current version changes are as follows:
Change Note 5 From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or ends).
Updated Arrows to correct arrow type.
September 26, 2012 FN7656.2 Corrected horizontal axis in Figure 9 on page 12 from 0 to 40 to -90 to 90.
September 21, 2011 FN7656.1 Changed Title on page 1 from “Integrated Digital Ambient Light Sensor with Interrupt Function” to “Ultra-Low Lux,
Low Power, Integrated Digital Ambient Light Sensor with Interrupt Function”
August 25, 2011
FN7656.0 Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, see the respective product information
page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 14
FN7656.5
September 28, 2016