|
EFR32MG1B732F256 Datasheet, PDF (18/94 Pages) Silicon Laboratories – EFR32MG1 Mighty Gecko SoC with Integrated Serial Flash Data Sheet | |||
|
◁ |
EFR32MG1 Mighty Gecko SoC with Integrated Serial Flash Data Sheet
Electrical Specifications
4.1.4 DC-DC Converter
Test conditions: LDCDC=4.7 µH (Murata LQH3NPN4R7MM0L), CDCDC=1.0 µF (Murata GRM188R71A105KA61D), VDCDC_I=3.3 V,
VDCDC_O=1.8 V, IDCDC_LOAD=50 mA, Heavy Drive configuration, FDCDC_LN=7 MHz, unless otherwise indicated.
Table 4.4. DC-DC Converter
Parameter
Input voltage range
Symbol
VDCDC_I
Output voltage programma-
ble range1
Regulation DC Accuracy
VDCDC_O
ACCDC
Regulation Window2
WINREG
Steady-state output ripple VR
Output voltage under/over- VOV
shoot
DC line regulation
DC load regulation
VREG
IREG
Test Condition
Min
Bypass mode, IDCDC_LOAD = 50
2.3
mA
Low noise (LN) mode, 1.8 V out-
2.4
put, IDCDC_LOAD = 100 mA, or
Low power (LP) mode, 1.8 V out-
put, IDCDC_LOAD = 10 mA
Low noise (LN) mode, 1.8 V out-
2.6
put, IDCDC_LOAD = 200 mA
1.8
Low noise (LN) mode, 1.8 V target
1.7
output
Low power (LP) mode,
LPCMPBIAS3 = 0, 1.8 V target
output, IDCDC_LOAD ⤠75 μA
Low power (LP) mode,
LPCMPBIAS3 = 3, 1.8 V target
output, IDCDC_LOAD ⤠10 mA
Radio disabled.
1.63
1.63
â
CCM Mode (LNFORCECCM3 =
â
1), Load changes between 0 mA
and 100 mA
DCM Mode (LNFORCECCM3 =
â
0), Load changes between 0 mA
and 10 mA
Overshoot during LP to LN
â
CCM/DCM mode transitions com-
pared to DC level in LN mode
Undershoot during BYP/LP to LN
â
CCM (LNFORCECCM3 = 1) mode
transitions compared to DC level
in LN mode
Undershoot during BYP/LP to LN
â
DCM (LNFORCECCM3 = 0) mode
transitions compared to DC level
in LN mode
Input changes between
â
VVREGVDD_MAX and 2.4 V
Load changes between 0 mA and
â
100 mA in CCM mode
Typ
â
â
Max
VVREGVDD_
MAX
VVREGVDD_
MAX
Unit
V
V
â
VVREGVDD_
V
MAX
â
VVREGVDD
V
â
1.9
V
â
2.2
V
â
2.1
V
3
â
mVpp
â
150
mV
â
150
mV
200
â
mV
50
â
mV
125
â
mV
0.1
â
%
0.1
â
%
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.0 | 17
|
▷ |