|
CP2105 Datasheet, PDF (1/24 Pages) Silicon Laboratories – Data format: 8 data bits, 1 stop bit Parity: Even, Pdd, No parity Baud rates: 2400 bps to 921600 bps | |||
|
CP2105
SINGLE-CHIP USB TO DUAL UART BRIDGE
Single-Chip USB to Dual UART Data Transfer
ï¬ï Integrated USB transceiver; no external resistors
required
ï¬ï Integrated clock; no external crystal required
ï¬ï Integrated 296-Byte One-Time Programmable ROM for
storing customizable product information
ï¬ï On-chip power-on reset circuit
ï¬ï On-chip voltage regulator: 3.45 V output
USB Peripheral Function Controller
ï¬ï USB Specification 2.0 compliant; full-speed (12 Mbps)
ï¬ï USB Suspend states supported via SUSPEND pins
Two UART Interfaces (âEnhancedâ and âStandardâ)
ï¬ï Flow control options:
- Hardware (CTS / RTS)
- Software (X-On / X-Off)
- No flow control
ï¬ï Configurable I/O (1.8 V to VDD) using VIO pin
ï¬ï Configurable I/O (VDD to 5 V) using external pull-up
ï¬ï All modem interface signals available (when GPIO is not
used)
Enhanced UART Interface Features
ï¬ï Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, mark, space, no parity
ï¬ï Baud rates: 300 bps to 2.0 Mbps
ï¬ï 320 Byte receive and transmit buffers
ï¬ï Two GPIO signals for status and control
ï¬ï RS-485 mode with bus transceiver control
Standard UART Interface Features
ï¬ï Data format: 8 data bits, 1 Stop bit
ï¬ï Parity: Even, Odd, No parity
ï¬ï Baud rates: 2400 bps to 921600 bps
ï¬ï 288 Byte receive and transmit buffers
ï¬ï Three GPIO signals for status and control
Virtual COM Port Device Drivers
ï¬ï Works with Existing COM Port PC Applications
ï¬ï Royalty-Free Distribution License
ï¬ï Windows 7/Vista/XP/Server 2003/2000
ï¬ï Mac OS-X
ï¬ï Linux
USBXpress⢠Direct Driver Support
ï¬ï Royalty-Free Distribution License
ï¬ï Windows 7/Vista/XP/Server 2003/2000
ï¬ï Windows CE 6.0, 5.0, and 4.2
Supply Voltage
ï¬ï Self-powered: 3.0 to 3.6 V
ï¬ï USB bus powered: 4.0 to 5.25 V
ï¬ï I/O voltage: 1.8 V to VDD
Package
ï¬ï RoHS-compliant 24-pin QFN (4 x 4 mm)
Ordering Part Number
ï¬ï CP2105-F01-GM
Temperature Range: â40 to +85 °C
Connect to
VBUS or
External Supply
USB
Connector
VBUS
D+
D-
GND
Logic Level
Supply
(1.8V to VDD)
REGIN Voltage
VDD Regulator
48 MHz
Oscillator
GND
USB Interface
VBUS
Full-Speed Peripheral
D+
12 Mbps
Function
D-
Transceiver Controller
CP2105
Baud Rate
Generator
Data FIFOs
320 B RX
320 B TX
ECI Clock
SCI Clock
GPIO / Handshake 6
Control
Enhanced UART
(ECI)
SUSPEND / RI_ECI
NC / DCD_ECI / VPP
GPIO0_ECI / DTR_ECI
GPIO.1_ECI / DSR_ECI
RTS_ECI
CTS_ECI
RXD_ECI
TXD_ECI
296 Byte PROM
(Product Customization)
RST
288 B RX
288 B TX
VIO
I/O Power and Logic Levels
Standard UART
(SCI)
GPIO / Handshake 6
Control
RXD_SCI
TXD_SCI
RTS_SCI
CTS_SCI
SUSPEND / RI_SCI
GPIO.0_SCI / DCD_SCI
GPIO.1_SCI / DTR_SCI
GPIO.2_SCI / DSR_SCI
Figure 1. Example System Diagram
Enhanced
UART
and GPIO
Signals
Standard
UART
and GPIO
Signals
Rev. 1.0 10/10
Copyright © 2010 by Silicon Laboratories
CP2105
|
▷ |