S-25C010A-H Datasheet, PDF (25/33 Pages) Seiko Instruments Inc – OPERATION SPI SERIAL E2PROM FOR AUTOMOTIVE

Rev.2.3_01_C
105°C OPERATION SPI SERIAL E²PROM FOR AUTOMOTIVE
S-25C010A/020A/040A H Series
2. 1 Input pin
CS, SCK
SI, WP, HOLD
Figure 23 CS , SCK Pins
2. 2 Output pin
Figure 24 SI, WP , HOLD Pins
VCC
SO
Figure 25 SO Pin
3. Precaution for use
• Absolute maximum ratings: Do not operate these ICs in excess of the absolute maximum ratings (as listed on the
data sheet). Exceeding the supply voltage rating can cause latch-up. Perform operations after confirming the
detailed operation condition in the data sheet.
• Operations with moisture on the S-25C010A/020A/040A pins may occur malfunction by short-circuit between pins.
Especially, in occasions like picking the S-25C010A/020A/040A up from low temperature tank during the
evaluation. Be sure that not remain frost on the S-25C010A/020A/040A’s pins to prevent malfunction by short-
circuit.
Also attention should be paid in using on environment, which is easy to dew for the same reason.
25