|
S-1133 Datasheet, PDF (16/37 Pages) Seiko Instruments Inc – HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR | |||
|
◁ |
HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1133 Series
Rev.2.1_00
7. Temperature coefficient of output voltage
âVOUT
âTa VOUT
The shadowed area in Figure 18 is the range where VOUT varies in the operating temperature range when the
temperature coefficient of the output voltage is ±130 ppm/°C.
Ex. S-1133B30 Typ.
VOUT
[V]
+0.39 mV/°C
VOUT(E)*1
â0.39 mV/°C
â40
25
85
Ta [°C]
*1. VOUT(E) is the value of the output voltage measured at 25°C.
Figure 18
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
[ ] [ ] [ ] âVOUT
âTa
mV/°C *1 = VOUT(S) V *2 Ã
âVOUT
âTa VOUT
ppm/°C *3 ÷ 1000
*1. Change in temperature of output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
16
Seiko Instruments Inc.
|
▷ |