S-5711A Datasheet, PDF (15/26 Pages) Seiko Instruments Inc – HALL IC

Rev.2.4_00
HALL IC
S-5711A Series
„ Precautions
• If the impedance of the power supply is high, the IC may malfunction due to a supply voltage drop caused by through-
type current. Take care with the pattern wiring to ensure that the impedance of the power supply is low.
• Note that the IC may malfunction if the power supply voltage rapidly changes.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• Large stress on this IC may affect on the magnetic characteristics. Avoid large stress which is caused by bend and
distortion during mounting the IC on a board or handle after mounting.
• When designing for mass production using an application circuit described herein, the product deviation and
temperature characteristics of the external parts should be taken into consideration. SII shall not bear any responsibility
for patent infringements related to products using the circuits described herein.
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including
this IC of patents owned by a third party.
Seiko Instruments Inc.
15