S-8244AAAPH-CEATFU Datasheet, PDF (1/32 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC FOR 1-SERIAL TO 4-SERIAL-CELL PACK

S-8244 Series
BATTERY PROTECTION IC FOR 1-SERIAL TO 4-SERIAL-CELL PACK
www.sii-ic.com
(SECONDARY PROTECTION)
© SII Semiconductor Corporation, 2003-2015
Rev.6.4_02
The S-8244 Series is used for secondary protection of lithium-ion batteries with from one to four cells, and incorporates a
high-precision voltage detector circuit and a delay circuit. Short-circuiting between cells makes it possible for serial
connection of one to four cells.
 Features
(1) Internal high-precision voltage detector circuit
• Overcharge detection voltage range: 3.700 V to 4.550 V: Accuracy of ± 25 mV (at +25°C)
(at a 5 mV/step) Accuracy of ± 50 mV (at −40°C to +85°C)
• Hysteresis:
5 types
0.38 ± 0.1 V, 0.25 ± 0.07 V, 0.13 ± 0.04 V, 0.045 ± 0.02 V, None
(2) High-withstand voltage:
Absolute maximum rating: 26 V
(3) Wide operating voltage range:
3.6 V to 24 V (refers to the range in which the delay circuit can operate
normally after overvoltage is detected)
(4) Delay time during detection:
Can be set by an external capacitor.
(5) Low current consumption:
At 3.5 V for each cell: 3.0 μA max. (+25°C)
At 2.3 V for each cell: 2.4 μA max. (+25°C)
(6) Output logic and form:
5 types
CMOS output active “H”
CMOS output active “L”
Pch open drain output active “L”
Nch open drain output active “H”
Nch open drain output active “L”
(CMOS / Nch open drain output for 0.045 V hysteresis models)
(7) Lead-free, Sn 100%, halogen-free^*1
*1. Refer to “ Product Name Structure” for details.
 Applications
• Lithium ion rechargeable battery packs (secondary protection)
 Packages
• SNT-8A
• 8-Pin MSOP
• TMSOP-8
1