TLE5216G Datasheet, PDF (6/17 Pages) Siemens Semiconductor Group – Smart Quad Channel Low-Side Switch

TLE 5216 G
(CS = L), all error reports can be shifted out serially. The rising edge of the CS will reset
all error registers. The function of the serial diagnostic interface is shown in figure 7.
The data input (SERIN) allows several TLE 5216 G or other serial diagnostic interfaces
to be cascaded.
A LOW signal on the reset pin (RESET) or a supply voltage lower than the operating
range (4.5 V) will erase the error register and disable all four power switches.
Absolute Maximum Ratings
T_j = – 40 °C to 150 °C
Parameter
Symbol
Supply voltage
V_S
Input voltages IN1 … IN4, SERIN, CLK, CS, RESET V_IN
Status output voltage Data OUT (SEROUT)
V_SEROUT
Operating temperature range
T_j
Storage temperature range
T_Stg
Output current per channel
T_j = 25 °C I_D(AZ)
T_j = 125 °C I_D(AZ)
Ground pin current
T_j = 25 °C I_GND
T_j = 125 °C I_GND
Thermal resistance (junction-case static)
See diagrams P-DSO-20-10 R_thJC
Transient thermal impendance
t_p = 100 µs; square pulse Z_thJC
t_p = 100 µs; triangle pulse Z_thJC
Values Unit
– 2 … 40
V
– 0.3 … 7
V
– 0.3 … 10 V
– 40 … 150 °C
– 50 … 150 °C
– 3.8 … 3.8 A
– 2.95 … 2.95 A
– 10 … 10 A
–8…8
A
5
K/W
0.5
K/W
0.2
K/W
Note: Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
Semiconductor Group
6
1998-06-22