PEB2023 Datasheet, PDF (2/25 Pages) Siemens Semiconductor Group – ISDN DC Converter Circuit IDCC

PEB 2023
PEF 2023
Revision History:
Original Version: Data Sheet 08.97
Previous Releases:
Data Sheet 02.97
Page
Subjects (changes since last revision)
all Pages Additional to the normal temperature range devices PEB 2023 also the extended
temperature range devices PEF 2023 are specified in this Data Sheet.
21
The ambient temperature under bias is separately defined for PEB 2023 and PEF
2023.
22
The maximum limit values for line regulation V_{REF Line} and load regulation V_{REF Load}
are reduced. The typical values are adapted.
22
The maximum limit value for voltage stability of f_OSC is reduced. The typical value is
adapted.
22
The test condition ambient temperature range T_A is extended for temperature
stability of V_REF and f_OSC.
23
The sense voltage V_Sense of the current limit comperator is separately defined for
PEB 2023 and PEF 2023.
Edition 08.97
This edition was realized using the software system FrameMaker^®.
Published by Siemens AG,
HL TS,
Balanstraße 73,
81541 München
© Siemens AG 08.1997.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes
and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies
and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will
take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs in-
curred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components¹ of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems² with the express
written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the
failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain hu-
man life. If they fail, it is reasonable to assume that the health of the user may be endangered.