LQ14D412 Datasheet, PDF (3/19 Pages) Sharp Electrionic Components – TENRI LIQUID CRYSTAL DISPLAY GROUP SHARP CORPORATION SPECIFICATION

I
1
LD-7606- 1
I
1. Application
q
I
This specification applies to color TFI’-LCD module, LQ14D412.
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICS, control
circuit, power supply circuit and a backlight unit (including a DC/AC inverter). Graphics and texts
can be displayed on a 640X3X480 dots panel with 16M colors by supplying 24 bit data signal
(8bit/color), four timing signals, +5V DC supply voltage for TFT-LCD panel driving and
supply voltage for a backlight-driving DC/AC inverter,
The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation
type. Therefore, this module is suitable for the computer display and the multimedia use.
Optimum viewing direction is 6 o’clock.
3. Mechanical Specifications
I
Parameter
Display size
I
Specifications
35 (13.8”) Diagonal
i unit
cm
Active area
281 .3(H) X 207.8(V)
mm
Pixel format
640(H) X 480(V)
pixel
(1 pixel= RYGtB dots)
Pixel pitch
I 0.44 (H) X 0.43 (V)
mm
Pixel cotilguration
R,G,B vertical stripe
Display mode
Normally white
Unit outline dimensions *1
330 (W)X 242 (H)X 18 (D)
mm
Mass
Surface treatment
1400+50
g
Anti-glare and hard-coating 2H
(Haze value =6)
*1. Note: excluding backlight cables.
Outline dimensions is shown in Fig. 1