LQ14D412 Datasheet, PDF (18/19 Pages) Sharp Electrionic Components – TENRI LIQUID CRYSTAL DISPLAY GROUP SHARP CORPORATION SPECIFICATION

..
LD-7606-16
1
!
-3. ^{reliability test items}
N.o. Test item
Conditions
—1 ^{High temperature storage test}
Ta=60~ 2 4 0 h
—2 ^{Low temperature storage test}
Ta= -25~ 240h
3 High temperature
Ta= 40~ ; 95%RH 240h
— ^{& high humidity operation test}
(No condensation)
,:
—4 ^{High temperature operation test}
Ta=50~ 2 4 0 h
—5 ^{Low temperature operation test}
Ta=O”C 240h
6 Vibration test
Frequency: 10-57Hz/Vibration width (one side) :O.075ntrn
(non- operating)
: 58+500Hz./Gravity :9.8m/sz
Sweep time: 11 minutes
J
Test period :3 hours
(1 hour for each direction of X,Y,Z)
7 Shock test
Max. gravity: 490m/sz
(non- operating)
Pulse width: 11 ms, half sine wave
Direction: *X,*Y, *Z
once for each direction.
[Result Evaluation Criteria]
Under the display quality test conditions with normal operation state, these shall be no change
which may affect practical display function.
14. Others
1) Lot No. Label:
2) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
If adjusted value is changed, the specification may not be satisfied.
3) Disassembling the module can cause permanent damage and should be strictly avoided.
4) Please be careful since image retention may occur when a fixed pattern is displayed for a long
,
time.
5) If any problem occurs in relation to the description of this specification , it shall be resolved
through discussion with spirit of cooperation.