LQ0B152 Datasheet, PDF (3/7 Pages) Sharp Electrionic Components – DEVICE SPECIFICATION FOR BACKLIGHT UNIT

SHARI=
(4) Input / Output terminals
4-l) I/O terminal order
Table 1
Pm No. Symbol i/o
Description
1 VHIGH i Power supply for lamp (High voltage side)
2
NC - No connection
3
VLOW
i Power supply for lamp (Low voltage side)
4-2) I/O connector
1) Installed socket housing : BHR-03VS-1
2) Applicable connector housing: SM02(8.O)B-BHS-1
( produced by Japan Solderless Terminal )
(5) Electrical characteristics
Table 2
LD8706- 2
Ta=25”C
[Note 1) Available current range considering light-adjustment.
[Note 2) Calculated value for reference (IL X VL)
[Note 31 Lamp life terminates when the luminance under the rated power
reached 50% of the initial value after the continuous operation
under rated power and the room temperature.
(6) Optical characteristics
Table 3
Ta=25”C
Parameter Symbol MIN. TYP. MAX. Unit
Remarks
Luminance
YL
26,000
cd/m2 (just for reference)
Chromaticity
X 0.261 0.291 0.321
[Note 31
Y 0.241 0.271 0.301
[Note 31 The measurement shall be executed 15-20 minutes after lighting
attracted power.
The value measured at the center of the cold cathode fluorescent
tube at a viewing cone 0.1 ’ by TOPCON luminance meter BM-7.