LQ043T1DG02 Datasheet, PDF (20/25 Pages) Sharp Electrionic Components – AVC Liquid Crystal Displays Group

LCY-W-06901 Page 17 of 21
11-5 Others
① Regarding storage of LCD modules, avoid storing them at direct sunlight-situation.
You are requested to store under the following conditions:
(Environmental conditions of temperature/humidity for storage)
(1) Temperature: 0～40°C
(2) Relative humidity : 95% or less
・ As average values of environments (temperature and humidity) for storing, use the following
control guidelines:
Summer season: 20～35°C, 85% or less Winter season: 5～15°C, 85% or less
・ If stored under the conditions of 40°C and 95% RH, cumulative time of storage must be less
than 240 hours.
② If stored at temperatures below the rated values, the inner liquid crystal may freeze, causing cell
destruction. At temperatures exceeding the rated values for storage, the liquid crystal may become
isotropic liquid, making it no longer possible to come back to its original state in some cases.
③ If the LCD is broken, do not drink liquid crystal in the mouth. If the liquid crystal adheres to a hand
or foot or to clothes, immediately cleanse it with soap.
④ If a water drop or dust adheres to the polarizer, it is apt to cause deterioration. Wipe it immediately.
⑤ Be sure to observe other caution items for ordinary electronic parts and components.
12. Delivery Form
12-1. Carton storage conditions
1) Carton piling-up: Max 8 rows
2) Environments
Temperature: 0～40°C
Humidity: 65% RH or less (at 40°C)
There should be no dew condensation even at a low temperature and high humidity.
3) Packing form: Refer to 16.LCD module packing carton
※Cartons are weak against damp, and they are apt to be smashed easily due to the compressive
pressure applied when piled up. The above environmental conditions of temperature and humidity are set
in consideration of reasonable pile-up for storage.
12-2．Packing composition
Name
quantity
Note
Carton size
Tray
(The number of Module)
Electrification prevention bag
1 575×360×225 (mm)
12 Material: Electrification prevention polypropylene
8 unit/tray: 80 unit/carton
Material: Electrification prevention polyethylene
2
680mm(length)×500mm(depth)×50µｍ(thin)
Carton weight (80 modules): Approx. 8.1 kg