C9WT728 Datasheet, PDF (15/17 Pages) Seoul Semiconductor – Specification

11. Soldering
(1) Lead Solder
Lead Solder
Pre-heat
120~150℃
Pre-heat time
120 sec. Max.
Peak-Temperature
240℃ Max.
Soldering time Condition 10 sec. Max.
2.5~5 C / sec.
Lead Solder
2.5~5o C / sec.
240 ^oC Max.
10 sec. Max.
1P2r0e~-h1e5a0toinCg
6A0bsoevc.eM20a0xo.C
120sec. Max.
(2) Lead-Free Solder
Pre-heat
Lead Free Solder
150~200℃
Pre-heat time
Peak-Temperature
120 sec. Max.
260℃ Max.
Soldering time Condition 10 sec. Max.
1~5 ^oC / sec.
Lead-free Solder
1~5 ^oC / sec.
260 ^oC Max.
10 sec. Max.
1P5r0e~-h2e0a0tionCg
6A0bsoevc.eM22a0xo.C
120sec. Max.
(3) Hand Soldering conditions
Do not exceed 4 seconds at maximum 315ºC under soldering iron.
(4) The encapsulated material of the LEDs is silicone.
Precautions should be taken to avoid the strong pressure on the encapsulated part.
So when using the chip mounter,
the picking up nozzle that does not affect the silicone resign should be used.
[Note] In case that the soldered products are reused in soldering process, we don’t guarantee the products.
Rev. 03
June 2009
www.acriche.com
SSC-QP-7-07-24 (Rev.00)