LC89515K Datasheet, PDF (6/6 Pages) Sanyo Semicon Device – CD-ROM/CD-I Error Correction/ Host Interface LSI

LC89515K
Specifications
Absolute Maximum Ratings at V_SS = 0 V
Parameter
Maximum supply voltage
I/O voltages
Allowable power dissipation
Operating temperature
Storage temperature
Soldering temperature
Symbol
V_DD max
V_I, V_O
Pd max
Topr
Tstg
Ta = 25°C
Ta = 25°C
Ta ≤ 70°C
10 seconds
Conditions
Allowable Operating Ranges at Ta = –30 to +70°C, V_SS = 0 V
Parameter
Symbol
Conditions
min
Supply voltage
V_DD
4.5
Input voltage range
V_IN
0
Electrical Characteristics
DC Characteristics at Ta = –30 to +70°C, V_SS = 0 V, V_DD = 4.5 to 5.5 V
Parameter
Input high level voltage
Input low level voltage
Input high level voltage
Input low level voltage
Output high level voltage
Output low level voltage
Output low level voltage
Input leakage current
Pull-up resistance
Symbol
Conditions
min
V_IH1
All input pins except those in (1) below and XTALCK
2.2
V_IL1
V_IH2
(1) _{RESET (Schmitt trigger), RD, WR, HRD, HWR,}
2.5
V_IL2
CMD, CS, ENABLE and all bus pins
V_OH
V_OL1
I_OH = –2 mA
I_OL = 2 mA
All output pins(including the
2.4
bus pins) except those in (2)
below and XTAL
V_OL2
I_OL = 2 mA
(2) INT (open drain circuit
with pull-up resistor)
I_L
V_I = V_SS, V_DD: All input pins
–25
R_UP
All bus pins, INT
10
Ratings
Unit
–0.3 to +7.0
V
–0.3 to V_DD + 0.3
V
350
mW
–30 to +70
°C
–55 to +125
°C
260
°C
typ
max
Unit
5.0
5.5
V
V_DD
V
typ
max
Unit
V
0.8
V
V
0.6
V
V
0.4
V
0.4
V
+25
µA
20
40
kΩ
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
s Anyone purchasing any products described or contained herein for an above-mentioned use shall:
ΠAccept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 1997. Specifications and information herein are subject to
change without notice.
No. 4272-6/6