LC87F1D64A Datasheet, PDF (5/29 Pages) Sanyo Semicon Device – CMOS IC FROM 64K byte, RAM 4K byte on-chip 8-bit 1-chip Microcontroller with Full-Speed USB

LC87F1D64A
Continued from preceding page.
• X'tal HOLD mode: Suspends instruction execution and the operation of the peripheral circuits except the base timer
and the infrared remote control receiver circuit.
1) The PLL base clock generator, CF and RC oscillator automatically stop operation.
2) The state of crystal oscillation established when the X'tal HOLD mode is entered is retained.
3) There are seven ways of resetting the X'tal HOLD mode.
(1) Setting the reset pin to the low level
(2) Reset generated by watchdog timer
(3) Setting at least one of the INT0, INT1, INT2, INT4, and INT5 pins to the specified level
(4) Having an interrupt source established at port 0
(5) Having an interrupt source established in the base timer circuit
(6) Having an bus active interrupt source established in the USB interface circuit
(7) Having an interrupt source established in the infrared remote control receiver circuit
„Package Form
• TQFP48J(7×7): Lead-/Halogen-free type
„Development Tools
• On-chip debugger: TCB87 type B + LC87F1D64A
„Flash ROM Programming Boards
Package
Programming boards
TQFP48J(7×7)
W87F55256SQ
„Flash ROM Programmer
Maker
Model
Supported version
Device
Flash Support Group, Inc.
(FSG)
Flash Support Group, Inc.
(FSG)
+
SANYO
(Note 1)
Single
Programmer
In-circuit
Programmer
AF9708
AF9709/AF9709B/AF9709C
(Including Ando Electric Co., Ltd. models)
AF9101/AF9103 (main body)
(FSG models)
SIB87 (Inter Face Driver)
(SANYO model)
Rev.03.06 or later
(Note 2)
LC87F1D64A
Single/Gang
SKK/SKK Type B
Application Version
SANYO
Programmer
In-circuit/Gang
(SANYO FWS)
SKK-DBG Type B
1.04 or later
Chip Data Version
LC87F1D64
Programmer
(SANYO FWS)
2.15 or later
Note1: On-board-programmer from FSG (AF9101/AF9103) and serial interface driver from SANYO (SIB87) together
can give a PC-less, standalone on-board-programming capabilities.
Note2: It needs a special programming devices and applications depending on the use of programming environment.
Please ask FSG or SANYO for the information.
No.A1220-5/29