LC87F1D64A Datasheet, PDF (17/29 Pages) Sanyo Semicon Device – CMOS IC FROM 64K byte, RAM 4K byte on-chip 8-bit 1-chip Microcontroller with Full-Speed USB

LC87F1D64A
Serial I/O Characteristics at Ta = -30°C to +70°C, VSS1 = VSS2 = VSS3 = 0V
1. SIO0 Serial I/O Characteristics (Note 4-1-1)
Parameter
Frequency
Symbol
tSCK(1)
Pin/Remarks
Conditions
SCK0(P12)
See Fig.8.
Specification
VDD[V]
min
typ
max
unit
2
Low level
tSCKL(1)
1
pulse width
High level
tSCKH(1)
1
pulse width
tSCKHA(1a)
• Continuous data transmission/
reception mode
• USB nor SIO4 are not in use
4
simultaneous.
• See Fig.8.
• (Note 4-1-2)
tSCKHA(1b)
• Continuous data
2.7 to 5.5
transmission/reception mode
tCYC
• USB is in use simultaneous.
• SIO4 is not in use
7
simultaneous.
• See Fig.8.
• (Note 4-1-2)
tSCKHA(1c)
• Continuous data transmission/
reception mode
• USB and SIO4 are in use
9
simultaneous.
• See Fig.8.
• (Note 4-1-2)
Frequency
tSCK(2)
SCK0(P12)
• CMOS output selected
4/3
• See Fig.8.
Low level
pulse width
High level
pulse width
tSCKL(2)
tSCKH(2)
1/2
tSCK
1/2
tSCKHA(2a)
• Continuous data transmission/
reception mode
• USB nor SIO4 are not in use
simultaneous.
• CMOS output selected
tSCKH(2)
+2tCYC
tSCKH(2)
+(10/3)
tCYC
• See Fig.8.
tSCKHA(2b)
• Continuous data transmission/ ^{2.7 to 5.5}
reception mode
• USB is in use simultaneous.
• SIO4 is not in use
simultaneous.
tSCKH(2)
+2tCYC
tSCKH(2)
+(19/3)
tCYC
tCYC
• CMOS output selected
• See Fig.8.
tSCKHA(2c)
• Continuous data transmission/
reception mode
• USB and SIO4 are in use
simultaneous.
• CMOS output selected
tSCKH(2)
+2tCYC
tSCKH(2)
+(25/3)
tCYC
• See Fig.8.
Note 4-1-1: These specifications are theoretical values. Add margin depending on its use.
Note 4-1-2: To use serial-clock-input in continuous trans/rec mode, a time from SI0RUN being set when serial clock is
"H" to the first negative edge of the serial clock must be longer than tSCKHA.
Continued on next page.
No.A1220-17/29