LC87F1D64A Datasheet, PDF (22/29 Pages) Sanyo Semicon Device – CMOS IC FROM 64K byte, RAM 4K byte on-chip 8-bit 1-chip Microcontroller with Full-Speed USB

LC87F1D64A
Consumption Current Characteristics at Ta = -30°C to +70°C, VSS1 = VSS2 = VSS3 = 0V
Parameter
Normal mode
consumption
current
(Note 7-1)
Symbol
IDDOP(1)
IDDOP(2)
Pin/
Remarks
VDD1
=VDD2
=VDD3
Conditions
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
• Internal PLL oscillation stopped
• Internal RC oscillation stopped
• USB circuit stopped
VDD[V]
min
4.5 to 5.5
3.0 to 3.6
Specification
typ
max unit
9.9
25
5.7
14
• 1/1 frequency division ration
IDDOP(3)
• FmCF=16MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 16MHz side
4.5 to 5.5
12
30
IDDOP(4)
• Internal PLL oscillation stopped
• Internal RC oscillation stopped
• USB circuit stopped
3.0 to 3.6
6.8
17
• 1/1 frequency division ration
IDDOP(5)
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
4.5 to 5.5
14
35
IDDOP(6)
• Internal PLL oscillation mode
• Internal RC oscillation stopped
• USB circuit active
3.0 to 3.6
7.7
19
• 1/1 frequency division ration
mA
IDDOP(7)
• FmCF=16MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 16MHz side
4.5 to 5.5
16
40
IDDOP(8)
• Internal PLL oscillation mode
• Internal RC oscillation stopped
• USB circuit active
3.0 to 3.6
8.8
22
• 1/1 frequency division ration
IDDOP(9)
IDDOP(10)
IDDOP(11)
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 6MHz side
• Internal RC oscillation stopped
• 1/2 frequency division ration
4.5 to 5.5
3.0 to 3.6
2.7 to 3.0
6.8
16
4.1
9.7
3.5
7.9
IDDOP(12)
IDDOP(13)
• FmCF=16MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 8MHz side
4.5 to 5.5
3.0 to 3.6
8.2
20
4.7
12
IDDOP(14)
• Internal RC oscillation stopped
• 1/2 frequency division ration
2.7 to 3.0
4.0
9.2
IDDOP(15)
IDDOP(16)
IDDOP(17)
• FmCF=0MHz (oscillation stopped)
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to internal RC oscillation
• 1/2 frequency division ration
4.5 to 5.5
3.0 to 3.6
2.7 to 3.0
0.73
3.5
0.43
1.9
0.37
1.5
IDDOP(18)
IDDOP(19)
• FmCF=0MHz (oscillation stopped)
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 32.768kHz side
4.5 to 5.5
3.0 to 3.6
45
174
18
86 μA
IDDOP(20)
• Internal RC oscillation stopped
• 1/2 frequency division ration
2.7 to 3.0
14
63
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
IDDHALT(2)
VDD1
=VDD2
=VDD3
• HALT mode
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
• Internal PLL oscillation stopped
• Internal RC oscillation stopped
• USB circuit stopped
4.5 to 5.5
3.0 to 3.6
4.9
12
mA
2.6
6.3
• 1/1 frequency division ration
Note 7-1: The consumption current value includes none of the currents that flow into the output Tr and internal pull-up
resistors.
Continued on next page.
No.A1220-22/29