LC75897PW Datasheet, PDF (32/34 Pages) Sanyo Semicon Device – 1/3, 1/4-Duty General-Purpose LCD Display Driver

LC75897PW
Sample Application Circuit 5
1/4 Duty, 1/2 Bias (for use with normal panels)
+3.3V
+5.8V
From the controller
C≥0.047µF
OPEN
VDD
VSS
VSS
VLCD
VLCD0
VLCD1
VLCD2
C
INH
CE
CL
DI
OSC
*2
COM1
COM2
COM3
S129/COM4
P1/S1
P2/S2
P3/S3
P4/S4
P5/S5
P8/S8
S9
S127
S128
(P1)
(P2)
(P3)
(P4)
(P5)
(P8)
General-purpose
output ports
Used for functions
such as backlight
control
Note: *2 Connect an external resistor Rosc and an external capacitor Cosc between the OSC pin and GND when
selecting the RC oscillator operating mode and connect a current protection resistor Rg (2.2 to 22kΩ) between
the OSC pin and the external clock output pin (external oscillator) when selecting the external clock operating
mode (see the note on the OSC pin peripheral circuits).
Sample Application Circuit 6
1/4 Duty, 1/2 Bias (for use with large panels)
+3.3V
+5.8V
R
10kΩ≥R≥2.2kΩ
C≥0.047µF
C
R
From the controller
VDD
VSS
VSS
VLCD
VLCD0
VLCD1
VLCD2
INH
CE
CL
DI
OSC
*2
COM1
COM2
COM3
S129/COM4
P1/S1
P2/S2
P3/S3
P4/S4
P5/S5
P8/S8
S9
S127
S128
(P1)
(P2)
(P3)
(P4)
(P5)
(P8)
General-purpose
output ports
Used for functions
such as backlight
control
Note: *2 Connect an external resistor Rosc and an external capacitor Cosc between the OSC pin and GND when
selecting the RC oscillator operating mode and connect a current protection resistor Rg (2.2 to 22kΩ) between
the OSC pin and the external clock output pin (external oscillator) when selecting the external clock operating
mode (see the note on the OSC pin peripheral circuits).
No.A0549-32/34