LC75884E Datasheet, PDF (25/27 Pages) Sanyo Semicon Device – 1/4 Duty LCD Display Drivers with Key Input Function

LC75884E, LC75884W
Notes on the controller key data read techniques
1. Timer based key data acquisition
(1) Flowchart
(2) Timing chart
t5: Key scan execution time when the key data agreed for two key scans. (800T(s))
t6: Key scan execution time when the key data did not agree for two key scans and the key scan was executed again.
(1600T(s))
t7: Key address (43H) transfer time
t8: Key data read time
T = —f—o1sc—
(3) Explanation
In this technique, the controller uses a timer to determine key on/off states and read the key data. The controller must
check the DO state when CE is low every t9 period without fail. If DO is low, the controller recognizes that a key has
been pressed and executes the key data read operation.
The period t9 in this technique must satisfy the following condition.
t9>t6+t7+t8
If a key data read operation is executed when DO is high, the read key data (KD1 to KD30) and sleep acknowledge
data (SA) will be invalid.
No. 6086-25/27