LC88F52H0A Datasheet, PDF (24/31 Pages) Sanyo Semicon Device – FROM 128K byte, RAM 6K byte on-chip 16-bit 1-chip Microcontroller

LC88F58B0A
Continued from preceding page.
Parameter
Symbol
Applicable
Pin/Remarks
Conditions
VDD[V]
min
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
VDD1
=VDD2
=VDD3
• HALT mode
• FmCF=12MHz ceramic mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz
4.5 to 5.5
• Internal RC oscillation stopped
• 1/1 frequency division mode
Specification
typ
max unit
2.9
4.4
IDDHALT(2)
IDDHALT(3)
• HALT mode
• FmCF=10MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 10MHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
4.5 to 5.5
3.0 to 4.5
2.5
4.2
1.3
3.0
mA
IDDHALT(4)
IDDHALT(5)
• HALT mode
• FmCF=4MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 4MHz
• Internal RC oscillation stopped
• 1/2 frequency division mode
4.5 to 5.5
2.2 to 4.5
0.90
1.6
0.40
1.1
IDDHALT(6)
IDDHALT(7)
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to internal RC oscillation
• 1/1 frequency division mode
4.5 to 5.5
2.2 to 4.5
0.42
1.25
0.20
0.85
IDDHALT(8)
IDDHALT(9)
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 32.768kHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
4.5 to 5.5
2.2 to 4.5
23
90
μA
10
40
HOLD mode
consumption
current
HOLDX
mode
consumption
current
IDDHOLD(1)
IDDHOLD(2)
IDDHOLD(3)
IDDHOLD(4)
VDD1
HOLD mode
• CF1=VDD or open (external clock mode)
HOLDX mode
• CF1=VDD or open (external clock mode)
• FmX'tal=32.768kHz crystal oscillator mode
4.5 to 5.5
2.2 to 4.5
4.5 to 5.5
2.2 to 4.5
0.05
20
0.03
15
μA
15
58
4
35
Note 7-1: The consumption current value includes none of the currents that flow into the output transistor and internal
pull-up resistors.
No.A1951-24/31