English
Language : 

LC88F52H0A Datasheet, PDF (23/31 Pages) Sanyo Semicon Device – FROM 128K byte, RAM 6K byte on-chip 16-bit 1-chip Microcontroller
LC88F58B0A
Consumption Current Characteristics at Ta=-40 to +85°C, VSS1=VSS2=VSS3=0V
typ: 5.0V (VDD=4.5V to 5.5V), 3.3V (VDD=3.0V to 4.5V, 2.2V to 4.5V)
Parameter
Symbol
Normal mode
consumption
current
(Note 7-1)
IDDOP(1)
Applicable
Pin/Remarks
Conditions
VDD[V]
min
VDD1
=VDD2
=VDD3
• FmCF=12MHz ceramic oscillation mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz
• Internal RC oscillation stopped
4.5 to 5.5
Specification
typ
max unit
9.3
15.0
• 1/1 frequency division mode
IDDOP(2)
• FmCF=10MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
4.5 to 5.5
8.5
14.4
IDDOP(3)
• System clock set to 10MHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
3.0 to 4.5
5.0
8.3
mA
IDDOP(4)
• FmCF=4MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
4.5 to 5.5
3.8
5.6
IDDOP(5)
• System clock set to 4MHz
• Internal RC oscillation stopped
• 1/2 frequency division mode
2.2 to 4.5
2.5
4.6
IDDOP(6)
IDDOP(7)
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to internal RC oscillation
• 1/1 frequency division mode
4.5 to 5.5
2.2 to 4.5
2.5
5.6
1.7
4.6
IDDOP(8)
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
4.5 to 5.5
63
155
IDDOP(9)
• System clock set to 32.768kHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
2.2 to 4.5
μA
39
102
IDDOP(10)
• FmCF=12MHz ceramic oscillation mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz
• Internal RC oscillation stopped
4.5 to 5.5
11.0
17.5
• PLL oscillation mode
• 1/1 frequency division mode
mA
IDDOP(11)
• FmCF=10MHz ceramic oscillation mode
• FmX'tal=32.768kHz crystal oscillation mode 4.5 to 5.5
10.3
17.0
• System clock set to 10MHz
IDDOP(12)
• Internal RC oscillation stopped
• PLL oscillation mode
• 1/1 frequency division mode
3.0 to 4.5
5.9
13.0
Note 7-1: The consumption current value includes none of the currents that flow into the output transistor and internal
pull-up resistors.
Continued on next page.
No.A1951-23/31