|
LC87F40C8A Datasheet, PDF (20/26 Pages) Sanyo Semicon Device – Internal 128K-byte FROM (ROM/CGROM), 2048 byte RAM, 1024-byte CGRAM, and 704×10-bit CRT Display RAM 8-bit 1-chip Microcontroller | |||
|
◁ |
LC87F40C8A
Consumption Current Characteristics at Ta = -10°C to +70°C, VSS1 = VSS2 = 0V
Parameter
Normal mode
current drain
(Note 7-1)
Symbol
IDDOP(1)
Pin/
Remarks
VDD1
=VDD2
Conditions
⢠FmX'tal=32.768kHz crystal oscillation mode
⢠System clock set to main clock VCO
⢠OSD VCO active
VDD[V]
min
Specification
typ
Max
unit
⢠Internal RC oscillator inactive
4.5 to 5.5
36
58 mA
⢠1/1 frequency division ratio
⢠OSD is analog mode
⢠DSL active
IDDOP(2)
⢠FmX'tal=32.768kHz crystal oscillation mode
⢠System clock set to main clock VCO
⢠OSD VCO active
⢠Internal RC oscillator inactive
4.5 to 5.5
28
47 mA
⢠1/1 frequency division ratio
⢠OSD is digital mode
⢠DSL active
IDDOP(3)
⢠FmX'tal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz
⢠Main clock and OSD VCOs inactive
4.5 to 5.5
100
300 µA
⢠Internal RC oscillator inactive
⢠1/2 frequency division ratio
HALT mode
IDDHALT(1)
HALT mode
current drain
⢠FmX'tal=32.768kHz crystal oscillation mode
(Note 7-1)
⢠System clock set to main clock VCO
⢠OSD VCO active
4.5 to 5.5
7
11 mA
⢠Internal RC oscillator inactive
⢠1/1 frequency division ratio
IDDHALT(2)
HALT mode
⢠FmX'tal=32.768kHz crystal oscillation mode
⢠System clock set to internal RC oscillator
4.5 to 5.5
600 1600
⢠1/1 frequency division ratio
IDDHALT(3)
HALT mode
µA
⢠FmX'tal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz
⢠Main and OSD VCOs inactive
4.5 to 5.5
75
200
⢠Internal RC oscillator inactive
⢠1/2 frequency division ratio
HOLD mode
current drain
IDDHOLD
VDD1
HOLD mode
⢠All oscillators inactive
4.5 to 5.5
0.05
20 µA
Note 7-1: The current drain value includes none of the currents that flow into the output transistors and internal pull-up
resistors.
No.A0139-20/26
|
▷ |