English
Language : 

LC87F40C8A Datasheet, PDF (12/26 Pages) Sanyo Semicon Device – Internal 128K-byte FROM (ROM/CGROM), 2048 byte RAM, 1024-byte CGRAM, and 704×10-bit CRT Display RAM 8-bit 1-chip Microcontroller
LC87F40C8A
Method of how to rewrite it in FLASH programmer/
SANYO FLASH writing tool (SFWS)
When reading or writing data to the LC87F40C8A, FLASH programmer of our recommendation or SANYO FLASH
writing tool (SFWS) is used. In both cases, exclusive conversion board (W87F40C8D, W87F40C8Q) is needed.
(1) FLASH programmer of our recommendation
Single word write
Manufacture
Name of device
version
Flash Support Group co.
(the former Ando Electric)
AF9708
Rev02.35
applicable device (code)
SANYO
LC87F40C8A (3B21C)
Data protection setting after
write operation
Protected
Write multiple words
Manufacture
Flash Support Group co.
(the former Ando Electric)
Name of device
AF9723 +
AF9833
Version
Rev01.83
applicable device (code)
SANYO
LC87F40C8A (3B21C)
Data protection setting after
write operation
Protected
• The LC87F40C8A does not support a silicon signature feature.
Do not use the feature (automatic device type selection) when programming this device.
• To avoid erasing the program, confirm the setting of the protection for activating the written program before using.
• It can’t be written with device code 29EE010
(2) SANYO FLASH writing tool (SFWS)
PC is connected with writer unit (SKK) by USB cable and it uses it.
(3) Exclusive writing conversion board
• W87F40C8D: DIP64S purpose
• W87F40C8Q: QIP64E purpose
When using the conversion board, all of the jumper SW must be set to the OFF position.
If set to the ON position, read/write operations will not perform correctly.
Pin 1 of the conversion board should be located as indicated below.
W87F40C8D: when viewing from the edge closest to jumper SW, pin 1 is located on the lower right of both the chip
and conversion board.
W87F40C8Q: when viewing from the edge closest to jumper SW, pin 1 of the chip is located on the upper right while
pin 1 of the conversion board is located on the lower right.
1pin W87F40C8Q
1pin W87F40C8D
No.A0139-12/26