LC863364 Datasheet, PDF (2/20 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

Features
LC863364/56/48/40A
(1) Read-Only Memory (ROM) :
65024 × 8 bits / 57344 × 8 bits / 49152 × 8 bits
40960 × 8 bits for program
16128 × 8 bits for CGROM
(2) Random Access Memory (RAM) :
640 × 8 bits (including 128 bytes for ROM correction function)
352 × 9 bits (for CRT display)
(3) OSD functions
- Screen display
: 36 characters × 16 lines (by software)
- RAM
: 352 words (9 bits per word)
Display area : 36 words × 8 lines
Control area : 8 words × 8 lines
- Characters
Up to 252 kinds of 16 × 32 dot character fonts
(4 characters including 1 test character are not programmable)
Each font can be divided into two parts and used as two fonts :
a 16 × 17 dot and 8 × 9 dot character font
- Various character attributes
Character colors
: 16 colors
Character background colors
: 16 colors
Fringe / shadow colors
: 16 colors
Full screen colors
: 16colors
Rounding
Underline
Italic character (slanting)
- Attribute can be changed without spacing
- Vertical display start line number can be set for each row independently (Rows can be overlapped)
- Horizontal display start position can be set for each row independently
- Horizontal pitch (bit 9 - 16)^*1 and vertical pitch (bit-32) can be set for each row independently
- Different display modes can be set for each row independently
Caption _• Text mode / OSD mode 1 / OSD mode 2 (Quarter size) / Simplifed graphic mode
- Ten character sizes ^*1
Horez. × Vert. = (1 × 1), (1 × 2), (2 × 2), (2 × 4), (0.5 × 0.5)
(1.5 × 1), (1.5 × 2), (3 × 2), (3 × 4), (0.75 × 0.5)
- Shuttering and scrolling on each row
- Simplified Graphic Display
*1 Note : range depends on display mode : refer to the manual for details.
(4) Bus Cycle Time / Instruction-Cycle Time
Bus cycle time
0.424µs
7.5µs
183.1µs
Instruction cycle time
0.848µs
15.0µs
366.2µs
System clock oscillation
Internal VCO
(Ref : X’tal 32.768kHz)
Internal RC
Crystal
Oscillation Frequency
14.156MHz
800kHz
32.768kHz
Voltage
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
(5) Ports
- Input / Output Ports
: 5 ports (28 terminals)
Data direction programmable in nibble units
: 1 port (8 terminals)
(If the N-ch open drain output is selected by option, the corresponding port data can be read in output mode.)
Data direction programmable for each bit individually : 4 ports (20 terminals)
- Input port
: 1 port (1 terminal)
No.6696-2/20