LC863364 Datasheet, PDF (14/20 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

LC863364/56/48/40A
8. Sample Current Dissipation Characteristics at Ta=-10°C to +70°C, VSS=0V
The sample current dissipation characteristics is the measurement result of Sanyo provided evaluation board when the
recommended circuit parameters shown in the sample oscillation circuit characteristics are used externally. The currents
through the output transistors and the pull-up MOS transistors are ignored.
Parameter
Symbol
Current dissipation
during basic
operation
(Note 3)
IDDOP(1)
Pins
VDD
Current dissipation IDDHALT(1) VDD
in HALT mode
(Note 3)
IDDHALT(2) VDD
IDDHALT(3) VDD
Current dissipation IDDHOLD
in HOLD mode
(Note 3)
VDD
Conditions
Ratings
unit
VDD[V] min. typ. max.
•FmX’tal=32.768kHz 4.5 - 5.5
X’tal oscillation
19
32 mA
•System clock :
VCO
•VCO for OSD
operating
•Internal RC
oscillation stops
•HALT mode
4.5 - 5.5
7
12 mA
•FmX’tal=32.768kHz
X’tal oscillation
•System clock :
VCO
•VCO for OSD stops
•Internal RC
oscillation stops
•HALT mode
4.5 - 5.5
•FmX’tal=32.768kHz
300 1200 µA
X’tal oscillation
•VCO for system
stops
•VCO for OSD stops
•System clock :
Internal RC
•HALT mode
4.5 - 5.5
50
200
•FmX’tal=32.768kHz
X’tal oscillation
•VCO for system
stops
•VCO for OSD stops
•System clock : X’tal
•HOLD mode
•All oscillation stops.
4.5 - 5.5
0.05
20 µA
(Note 3) The currents through the output transistors and the pull-up MOS transistors are ignored.
No.6696-14/20