LC863364 Datasheet, PDF (13/20 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

LC863364/56/48/40A
6. Pulse Input Conditions at Ta=-10°C to +70°C, VSS=0V
Parameter Symbol
Pins
Conditions
High/low level
pulse width
tPIH(1)
tPIL(1)
tPIH(2)
tPIL(2)
tPIH(3)
tPIL(3)
tPIH(4)
tPIL(4)
tPIL(5)
tPIH(6)
tPIL(6)
Rising/falling tTHL
time
tTLH
•INT0, INT1
•INT2/T0IN
INT3/T0IN
(1/1 is selected for
noise rejection
clock.)
INT3/T0IN
(1/16 is selected for
noise rejection
clock.)
INT3/T0IN
(1/64 is selected for
noise rejection
clock.)
RES
HS , VS
HS
•Interrupt acceptable
•Timer0-countable
•Interrupt acceptable
•Timer0-countable
•Interrupt acceptable
•Timer0-countable
•Interrupt acceptable
•Timer0-countable
Reset acceptable
•Display position
controllable (Note)
•The active edge of
HS and VS must
be apart at least
1 tCYC.
•Refer to figure 6.
Refer to figure 6.
VDD[V]
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
Ratings
min. typ. max.
unit
1
tCYC
2
32
128
200
µs
8
500 ns
7. AD Converter Characteristics at Ta=-10°C to + 70°C, VSS=0V
Parameter
Resolution
Absolute
precision
Conversion
time
Analog input
voltage range
Analog port
input current
Symbol
Pins
N
ET
tCAD
VAIN AN4 - AN7
IAINH
IAINL
Conditions
(Note 3)
ADCR2=0 (Note 4)
ADCR2=1 (Note 4)
VAIN=VDD
VAIN=VSS
Ratings
unit
VDD[V] min. typ. max.
4.5 – 5.5
8
bit
±1.5 LSB
16
tCYC
32
VSS
VDD V
1
µA
-1
(Note 3) Absolute precision does not include quantizing error (1/2LSB).
(Note 4) Conversion time is the time till the complete digital conversion value for analog input value is set to a register after
the instruction to start conversion is sent.
No.6696-13/20